Panasonic KX-TG9471B, KX-TG9472B If you subscribe to a DSL/ADSL service, Battery installation

Getting Started

If you use the unit as a single-line telephone only

Be sure to connect the telephone line cord to LINE 1/2. Change the line selection mode from “Auto” to “Line1” (page 14).

“Click”

“Transparent” plug

To single-line

telephone2-wirecord jack (RJ11C)

Note:

R “Check tel line 2” is displayed on the unit.

To erase it, see page 45.

If you subscribe to a DSL/ADSL service

Please attach a DSL/ADSL filter (contact your DSL/ ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–noise is heard during conversations.

–Caller ID features do not function properly.

To connect to a 2-line telephone jack

For this connection, please purchase a Panasonic 2-line splitter (page 4).

Example: DSL/ADSL line is line 2

“Click”

“Transparent” plug

“GREEN” plug

To 2-line telephone

jack (RJ14C)

2-line splitter

“Click”

2-wire cord

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

To connect to 2 single-line telephone jacks

Example: DSL/ADSL line is line 2

“Click”

“Transparent” plug

“GREEN” plug

To single-line telephone
jacks (RJ11C)		4-wire cord
Line 1
2-wire cord
Line 2
DSL/ADSL filter*	“Click”

*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.

Battery installation

R USE ONLY Ni-MH batteries AAA (R03) size. R Do NOT use Alkaline/Manganese/Ni-Cd

batteries.

RConfirm correct polarities ( , ).

Rechargeable Ni-MH ONLY

DSL/ADSL

4-wire cord

filter*“Click”

For assistance, please visit http://www.panasonic.com/help 9