B a r C o d e F i e l d R e c o r d
The bar code field record is constructed as shown below.
Syntax | B##,IFLAG,IVALUE,ROW,COL,DENSITY,BFONT, | |
| ||
Field | Contents | |
BARCODE | Must be the letter ‘B’ for a bar code field. | |
| The B is followed by one or two digits for the field number. | |
| There can be up to 100 fields per format, in any combination | |
| of text, barcode, line, or graphic fields. | |
| Values: | |
IFLAG | You can set numeric fields to increase or decrease in value as | |
| each ticket is printed. | |
| This parameter consists of one character to define the field as | |
| incremented, decremented, or constant. | |
| Values: | I = Increment |
|
| D = Decrement |
| If the field does not change, define IFLAG as ‘I’ and set | |
| IVALUE to zero (0). | |
| NOTE: Do not select incrementing on UPC or EAN bar codes | |
|
| or fields that contain a check digit. |
IVALUE | One to three digits to define the amount by which the value in | |
| the field increases or decreases as each ticket is printed. If | |
| the field does not change, define IFLAG as ‘I’ and set IVALUE | |
| to zero (0). | |
| NOTE: The first number in the count sequence must contain | |
|
| the same number of digits as the highest number to |
|
| be counted. For example, to count the numbers 1 to |
|
| 999, the first number in the sequence must be entered |
|
| as 001. |
| Values: |
|
ROW | One to four digits to define the row location of the field on the | |
| supply. This is the distance from the guide edge zero point at | |
| the bottom of the supply and the bottom of the field. |