Paxar 9474 manual Column, Direction, Stop, Thickness

Field	Contents
L##	Must begin with the letter ’L’ for a line field.
	The L is followed by one or two digits for the field number.
	There can be up to 100 fields per format, in any combination
	of text, barcode, line, or graphic fields.
	Values:	0-99
ROW	One to four digits to define the row location of the field on the
	supply. This is the distance from the the guide edge zero
	point at the bottom of the supply and the bottom of the field.
	The zero point is 1.5 mm or 0.060 inches from the bottom of
	the supply. The bottom of the supply is the edge that exits the
	printer first.
	This value is measured in tenths of millimeters (TOMMS) and
	must be less than the maximum length of the supply.
	Values:	0-2032
COLUMN	One to four digits to define the column location of the field on
	the supply. This is the distance from the guide edge zero
	point at the left edge of the supply and the left edge of the
	field.
	The zero point is 1.5 mm or 0.060 inches from the left edge of
	the supply.
	The unit of measurement is tenths of millimeters. The range
	must be less than the maximum width of the supply.
	Values:	0-1016(0 to 4 inches)
DIRECTION	One digit to define the direction of the line.
	Values:	0 = Vertical
		1 = Horizontal
STOP	One to four digits to define the stop position (Row or Column,
	dependent on the DIRECTION setting) for the line.
	Values:	1-2032
THICKNESS	One or two digits for the line thickness in dots. 1 dot = 1/192
	inch
	Values:	1-15

Message Structures 3-17