The zero point is 1.5 mm or 0.060 inches from the bottom of the supply. The bottom of the supply is the edge that exits the printer first.
This value is measured in tenths of millimeters (TOMMS) and must be less than the maximum length of the supply.
| Values: |
|
| NOTE: The minimum row location for serial bar code fields is | |
|
| 23 (0.09 inches) |
COL | One to four digits to define the column location of the field on | |
| the supply. This is the distance from the guide edge zero | |
| point at the left edge of the supply and the left edge of the | |
| field. |
|
| The zero point is 1.5 mm or 0.060 inches from the left edge of | |
| the supply. | |
| The unit of measurement is tenths of millimeters. The range | |
| must be less than the maximum width of the supply. | |
| Values: | |
DENSITY | One digit for the bar code density for Interleaved 2 of 5, Code | |
| 128, MSI, Code 39, and UPC/EAN bar codes. | |
| Values: | |
| Some bar codes do not support all 5 values. | |
| For the actual densities for these values, see Chapter 5, | |
| "Quick References." | |
BFONT | One digit indicating which bar code font to use. |
Values: 1
2
3Interleaved 2 of 5
4 Code 39
5 Codabar
6
7
8 Code 128
9 MSI
10 UPC/EAN+2
11 UPC/EAN+5
Message Structures