PROGRAMMING QUICK START
This section provides a quick reference for experienced users to start programming the
Programming from an Extension Phone
1.Pick up any phone on the same line as the
2.Enter 1, 
, then your
3.Enter a remote command.
4.Hang up the phone.
Note: To program another feature, repeat these steps.
Programming from a Remote Phone
1.Dial your phone number.
2.After the TAD or fax switch answers, enter 1, 
, then your
3.Enter a remote command within 10 seconds.
4.Hang up the phone.
Note: To program another feature, repeat these steps.
27
