43-1245.fm Page 14 Wednesday, August 18, 1999 9:51 AM

2.Plug the adapter’s other end into a standard 120-volt AC power outlet.

Caution: You must use a Class II, 120V AC/12V DC adapter that delivers at least 400 milliamps. Its center tip must be set to negative and its plug must correctly fit the AFX-300’s DC 12V jack. The supplied adapter meets these requirements. Using an adapter that does not meet these requirements could damage the AFX-300 or the adapter.

3.Wait about 10 seconds, then unplug the adapter’s barrel plug from the AFX-300’s DC 12V jack.

4.Wait another 10 seconds, then reconnect the adapter’s barrel plug to the AFX-300’s DC 12V jack.

5.Route the AC adapter cord through the AFX-300’s strain relief slot.

RESET

OPEN

AC

ADAPTER

14

Page 14
Image 14
Radio Shack AFX-300 owner manual Fm Page 14 Wednesday, August 18, 1999 951 AM