USING THE TELEPHONE
MAKING A CALL
1.Pick up the handset, or press DIAL. You hear a dial tone.
2.Dial the telephone number.
If you stored the number in mem- ory, press the
3.When the receiving party answers, pick up the handset (if necessary) and begin your con- versation.
4.Replace the handset.
ADJUSTING THE SPEAKER VOLUME
When the fax machine is making a call, you hear the dial tone, the dialing signals, and the ringing or busy signal through the
REDIALING
To save time when you make a phone call or send a document, you can redi- al a busy or unanswered number as many times as you want by pressing
REDIAL/PAUSE.
Your fax machine dials the last num- ber dialed, and you can hear the dial- ing process through the speaker.
If you get a busy signal or there is no answer, press DIAL to end the call.
USING FLASH
FLASH provides the electronic equiva- lent of the switchhook signal required by many special services such as call waiting (a service available from most telephone companies).
For example, if you have call waiting, you can press FLASH to put the first call on hold and take a second incom- ing call on the same line. Pressing FLASH again lets you alternate be- tween the two calls.
Note: If you do not subscribe to a ser- vice that uses a switchhook signal, do not press FLASH during a call. You might disconnect the call.
17
