Radio Shack TFX-1031 owner manual Storing a Number for Memory Dialing, Store MEM. Dial, Namexyz

43-1203.fm Page 16 Wednesday, August 18, 1999 8:37 AM

Storing a Number for

Memory Dialing

You can store up to 30 telephone or fax numbers into two-digit memory dial locations. You can then dial the number by pressing MEMORY and then entering the two-digit number where you stored it.

Note: To stop storing a number, press STOP any time before Step 4. The fax machine returns to standby. If neces- sary, start over again.

1.Press and hold MEMORY until the fax machine displays:

:STORE MEM. DIAL

:MEM. NO[01-30] ??

2.Enter a two-digit location number (01 through 30) where you want to store the number.

:MEM.NO[01-30] 01

3.Enter the number you want to store (up to 34 digits).

:TEL.:9P4602778

Note: Press REDIAL/PAUSE to insert a 2-second pause between numbers. The fax machine dis- plays P at the pause entry.

4.When the number appears cor- rectly, press ENTER.

: NAME:

16

5.If desired, enter the name (up to 20 characters). For details on entering the name, see “Entering Names” on Page 13.

: NAME:XYZ

6.Press ENTER when the name appears correctly. The fax machine returns to the display shown in Step 2.

Notes:

•If you make a mistake, use DIREC- TION < or > to move the cursor to the incorrect digit/character and enter the new one over it. You can also use INS or DEL to insert or delete digits/characters.

•If there is a number or name already assigned to the selected two-digit memory dial location, the fax machine displays the number and name. If you want to change the number or name, enter the new number or name over the old one. Otherwise, press STOP.