SENDING FAXES
Fax Tips
To ensure the best fax transmission results:
•Never send documents that are excessively curled, thin, torn, coated, or crumpled.
•Let wet ink or correction fluid on documents dry completely before you send them.
•Never use
•Remove staples, paper clips, and tape before you load a document. Failure to do so might damage the fax machine.
•The fax machine sends any docu- ment from 6 (W) × 5 (L) inches to 81/2 (W) × 59 (L) inches.
•If a communication error occurs, the fax machine sounds a long warning tone. Send the fax again.
20
Loading a Document
Note: You can load only one sheet at
atime.
1.Turn the document face down and gently insert the leading edge into the feeder slot.
| 0 |
| 0 |
0 | |
0 |
|
0 |
|
0 |
|
0 |
|
The fax machine automatically pulls in the page.
2.When the document is loaded properly, the fax machine dis- plays:
:DOCUMENT LOADING
3.If necessary, adjust the resolution and contrast setting according to the type of documents. See “Set- ting the Resolution and Contrast” on Page 21.
:NORMAL
4.You can now send the document. See “Dialing Fax Numbers” on
Page 21.
