Raypak Y-200 Power Test, Domestic Hot Water Supply Applications, Check Power, From, Indication

Domestic Hot Water Supply

Applications

Fig. 7: Domestic Hot Water Supply

•Outdoor reset function should be disabled. See screen 06 and 24.

Power Test

Check Power

Utilizing a Volt-ohm meter (VOM) monitor the following on the controller for proper voltage levels. Check at the Terminal Block (TB-1).

From	To	Indication
TB pin 1	TB pin 2	108 VAC to 132
		VAC
TB pin 1	Single Point	108 VAC to 132
	Ground	VAC
TB pin 2	Single Point	Less than 0.6 VAC
	Ground

Table C: Voltage Measurements

11