RCA 15407690 manual Attaching the LNB Support Arm and Adapter, Move On to the Next Section

Preparing for Installation

Attaching the LNB Support Arm and Adapter

1.Attach the rectangular LNB feeder tube to the antenna socket making sure that the round hole for the spacer is positioned as shown in the diagram below. Tighten the bolt while holding the nut.

LNB adapter

Feeder tube

2.Attach the LNB adapter to the feeder tube and secure it by using a #8 hex insert and a 1” long phillips head screw.

LNB

1/4” x 1-1/2” Hex Head Bolt

(Feed Tube Mounting)

1/4” Flat Washer

1/4” Hex Flange Nut

.81 Long Spacer

(Feed Tube Mounting)

#8 x 1” Phillips Head Screw (LNB & Adapter Mounting)

#8 Insert Nut

(LNB & Adapter Mounting)

Move On to the Next Section

Now that you have all of the preliminary installation steps completed, go on to the next section “Mounting the Mast.”

16 Chapter 1