RCA 15407690 manual Making the Final Connections, About the Phone Connection

Final Installation

7.Be sure to ground the multiswitch.

8.Use a silicone sealant to seal all outside connections and the hole you drilled for the coaxial cable to enter your house.

RG-6 cables from the grounding blocks

Cables for Satellite B (119° )

Cables for Satellite A

(101° )

RG-6 cable to HDTV, set-top converter

or satellite receiver

Ground the multiswitcher

Making the Final Connections

1.Connect the RG-6 coaxial cable to the IN jack for satellite cable at the back of the digital satellite receiver, HDTV, or HD set-top converter as shown. DO NOT connect the coaxial cable to the IN FROM ANTENNA jack!

2.Take a phone off the hook to prevent electric shock from incoming calls.

3.Connect a phone cord from the back of the digital satellite receiver, HDTV, or HD set-top converter to a phone jack.

Step 1: Connect the RG-6 cable to the IN jack for satellite reception on the back of the digital satellite receiver, HDTV, or HD set- top converter box.

PHONE JACK

SATELLITE IN

Step 2 & 3: Take the phone off the hook before you connect a phone cord from an outlet to the back of the digital satellite receiver, HDTV, or HD set-top converter .

About the Phone

Connection

The satellite receiver calls a telephone number once a month or so to update your Access Card. It is also used to order Pay-Per-View (PPV) events. These calls only take a few seconds.

Chapter 3 35