Programming the Telephone
Ring Volume
There are 5 volume levels and OFF for your selection. The Ring volume can be set individually for each line.
From the Sound Settings Menu:
1.Press the VOL (- or +) button to scroll to the Ring Volume.
2.Press SELECT soft key.
3.Use the VOL (- or +) button to scroll to your selection and use the DIR or CID button to toggle between L 1 and L 2. The default setting is VOL 3.
4.Press SELECT soft key to save your selection and “Saved” shows in the display.
Key Tone
From the Sound Settings Menu:
1.Press the VOL (- or +) button to scroll to the Key Tone.
2.Press SELECT soft key. Use the VOL (- or +) button to select On or Off.
3.Press SELECT soft key to save your selection and “Saved” shows in the display.
Answering System (only applicable for base)
1.Make sure your phone is OFF (not in Talk mode).
2.Press the MENU soft key on BS to go to the main menu.
3.Press VOL (- or +) button to scroll to “Answer Sys.”.
4.Press SELECT soft key to confirm. You may program the following items in base: On/Off Status, OGA Playback, OGA Record, Set OGA, Set Office Time, Ring Delay, Message Length, Call Screening, Message Alert, Remote Password.
On/Off Status
This is used to set the answering system On or Off for each telephone line individually.
From the Answering System Menu:
1.Press the VOL (- or +) button to scroll to the On/Off Status.
2.Press SELECT soft key.
3.Use the VOL (- or +) button to select On or Off and use the DIR or CID button to toggle between L1 and L2.
4.Press the SELECT soft key to save your selection and the status shows in the display.
20
