Other Information
5.To exit remote operation, hang up. The system will automatically disconnect the call if the user does not enter a command within 10 seconds.
NOTE: Only the message being played can be erased in remote access mode.
Memory Full
When the answering system memory is full, the system answers after 10 rings. “Memory full” will be announced and waits for you to enter
You should erase some messages so the answering system may record new messages.
NOTE: The unit also answers after the 10th ring if it is set to Answer Off. To access the answering system, enter your
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved
1.Make sure the telephone is OFF (not in Talk mode) before you replace battery.
2.Remove the battery compartment door.
3.Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the handset.
4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.
5.Put the battery compartment door back on.
6.Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge (for 14 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.
Battery Safety Precautions
•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.
•To reduce the risk of fire or personal injury, use only the
•Keep batteries out of the reach of children.
•Remove batteries if storing over 30 days.
NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org or call
39
