Programming the Telephone
Ring Delay
This feature lets you select the number of times you want the phone to ring before the answering system answers a call.
From the Answering System Menu:
1.Press the VOL (- or +) button to scroll to the Ring Delay.
2.Press SELECT soft key.
3.Use the VOL (- or +) button to scroll to your selection, from 2 rings to 6 rings or toll saver, and use the DIR or CID button to toggle between L1 and L 2.
4.Press the SELECT soft key to save your selection and “Saved” shows in the display.
NOTE: When the Toll saver is selected, the unit will answer the incoming call after 3 rings if there is new message. Otherwise, the unit will answer the incoming call after 5 rings.
Message Length
From the Answering System Menu:
1.Press the VOL (- or +) button to scroll to the Message Length.
2.Press SELECT soft key.
3.Use the VOL (- or +) button to scroll to your selection, from 1 to 3 minutes, and use the DIR or CID button to toggle between L 1 and L 2.
4.Press the SELECT soft key to save your selection and “Saved” shows in the display.
Call Screening
From the Answering System Menu:
1.Press the VOL (- or +) button to scroll to the Call Screening.
2.Press SELECT soft key. Use the VOL (- or +) button to select On or Off.
3.Press the SELECT soft key to save your selection and “Saved” shows in the display.
Message Alert
This feature set your answering system to give an alert tone every 10 seconds when there are new messages.
From the Answering System Menu:
1.Press the VOL (- or +) button to scroll to the Message Alert.
2.Press SELECT soft key. Use the VOL (- or +) button to select On or Off. Default is On.
3.Press the SELECT soft key to save your selection and “Saved” shows in the display.
23
