|
| Memory |
|
|
|
Number of digits | Explanation | Example |
| ||
| ||
| number |
|
long distance code 1 | (i.e. | |
|
| |
|
|
4.To dial the displayed number, select a Line or press Talk, Spk, or Headset button.
If You Did Not Program Your Local Area Code
1.Use the CID button to display the number you want to dial. You will only see
2.Press Talk, Spk, Headset button or select a Line to dial back. You may adjust the number format by pressing the FORMAT soft key before dialing.
Call Waiting Caller ID
This feature allows you to see who is calling when you hear the call waiting beep. The caller identification information appears in the display after you hear the tone.
•Press the Flash button to put the person to whom you’re talking on hold and answer the incoming call.
IMPORTANT: To use all the features of this unit, you must subscribe to either the standard Name/Number Caller ID Service or Caller ID with Call Waiting Service. To know who is calling while you are on the phone, you must subscribe to Caller ID with Call Waiting Service.
Memory Log and Phone Book (Directory) Memory
You may store data in the Phone Book Directory (up to 99 records) or an Intercom/Memory (10 buttons located to the right of the number pad on the base). The Phone Book and each Intercom/Memory Log stores up to 16 characters and 32 digits.
The records are stored by alphabetic ascending order.
Adding Phone Book Entries
1.Make sure the phone is OFF (not in Talk mode).
2.Press the DIR button.
3.Press the NEW soft key. “Enter Name” shows in the display. Please refer to section “Handset Name” for name editing method.
4.Press SAVE soft key. “Enter Number” shows in the display.
5.Use the
TIP: Press the #pause button twice to insert a pause in a number if necessary.
6. Press the SAVE soft key to enter VIP tone melody selection.
33
