Telephone Operation

Making Call in the Speakerphone mode (from the handset)

1.Press the Speaker button to activate the speakerphone on the first available line.

-OR-

Press the LINE 1 or LINE 2 soft key to select a specific line. The handset will activate the ear piece.

2.Press the Speaker button to switch to speakerphone mode.

3.Wait for a dial tone then dial the phone number.

4.Press the End button when finished.

Making Calls with the Optional Headset

1.Plug the headset into the Headset jack on the side of the base or side of the cordless handset.

2.Adjust the headset to rest comfortably on top of your head or over your ear.

3.Move the microphone to approximately 2 to 3 inches from your mouth.

4.For the base, press the Headset button on base and the phone automatically selects first available, if both lines are available, Line 1 will be used.

5.For the cordless handset, press the Talk button.

6.Wait for a dial tone, and then dial the phone number.

7.Press Headset button (on base) or End button (on handset) when finished.

CAUTION: Use only Thomson Inc. 5-2425 headset that is compatible with this unit.

NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error tone is heard when the Headset button is pressed.

Pre-dialing

1.With the phone idle, manually enter the telephone number. The telephone number shows in the display.

2.Press the DIAL soft key (on base only), Speaker button, Talk button (handset only), or Line 1 or Line 2 button to take a line, and then the telephone number will be dialed out.

Answering a Call

For cordless handset:

1.Press the Talk button to answer the call in receiver mode, -OR-

2.Press the Spk button to answer the call in speakerphone mode, -OR-

3.Press the corresponding LINE soft key to answer the call in receiver mode.

4.When finished, press END button.

25

Page 25
Image 25
RCA 00023265 Making Call in the Speakerphone mode from the handset, Making Calls with the Optional Headset, Pre-dialing