Connections & Setup
STOP |
| R | RETAKE | F | |
COUNTER | R/M |
| IPE |
| DIGIFECT |
| FADE/W |
| |||
| P . | AE | |||
CHARGE | POWER | REFRESH | EJECT |
Insert a cassette tape
1.Make sure the camcorder is connected to a power supply.
2.Adjust the viewfinder.
3.With the camcorder set to A (automatic record), slide the EJECT switch until the cassette tape holder opens. Don’t force the camcorder open.
4.Insert a tape with the tape wheel facing up and the tape window facing out.
EJECT switch
Tape window
Tape wheel
Notes:
•Make sure the tape is not slack when loading the cassette tape. If there is any slack, turn the wheel on the cassette tape in the direction of the arrow to take up the slack.
•Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.
5.Push on the area marked CLOSE until the cassette tape holder locks into place. (PAUSE appears in the viewfinder.)
Notes:
•You can’t open the cassette tape holder
unless a power supply is attached.
•The cassette tape holder can’t be opened while the camcorder is in the
record mode.
Area marked
CLOSE
BATTERY
RELEASE switch
Cassette tape holder
Chapter 1 | 13 |
