Playback

Removing the Tape from the Cassette

Tape Adapter

1. Slide the adapter’s EJECT switch to the right. The load detector extends from the side and the whirring sound indicates the tape is being released before the adapter’s tape compartment lid opens.

2. Use the access hole on the bottom of the

EJECT switch

adapter to push the tape up and remove it from

 

 

the adapter.

 

3. Gently close the adapter’s tape compartment lid.

 

Caution: If the load detector is still extending

 

from the side of the cassette tape adapter after

 

you’ve attempted to load the tape, loading is not

 

complete. Try to load the tape again. Attempting

 

to insert the cassette tape adapter into a VCR with

 

the load detector extended may cause damage to

 

the adapter and/or VCR.

 

Caution: Do not touch the reels during loading

 

and unloading. It could cause injury or damage

 

the cassette tape adapter or tape.

Notes:

During special-effect playback (still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

To record on a VCR using a compact tape and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Chapter 4

51

Page 53
Image 53
RCA CC6254 manual Removing the Tape from the Cassette Tape Adapter, Gently close the adapter’s tape compartment lid