![](/images/new-backgrounds/1217710/217710115x1.webp)
Recording
JLIP (Joint Level Interface Protocol) Identification Number
You can connect a device, such as a home computer, to the JLIP connector on the camcorder.
MENU Dial (Rotate or Press In)
JLIP Connector
(Under Cover)
VCR
POWER OFF CAMERA
To Select a JLIP ID NO.
1.Make sure the camcorder is in record- pause and the AE dial is not set
to AUTO.
2.Press the MENU dial in to display the main MENU in the viewfinder.
| MENU |
|
MENU END | AUTO | |
FOCUS | ||
EXPOSURE | AUTO | |
DATE/TIME | NOV 18.98 | |
TELE MACRO | OFF | |
TAPE LENGTH | T30 | |
M.W.B. | AUTO | |
ZOOM SPEED | FAST | |
NEXT |
|
|
3.Rotate the MENU dial to highlight NEXT. The second MENU will appear. Keep rotating the MENU dial to highlight JLIP ID NO.
BACK | OFF | |
REC TIME | ||
INT. TIME | OFF | |
TALLY LAMP | ON | |
CHARACTER | 07 | |
JLIP ID NO. |
| |
DEMO MODE | OFF | |
MENU END |
|
4.Press the MENU dial in to display the JLIP ID NO. menu.
JLIP ID NO.
ID NO. 84
EXIT
5.Press the MENU dial in to start the ID NO. (numbers) flashing. Rotate the MENU dial to select a number from 01 to 99. Press the MENU dial in to select a JLIP number.
Use the number you select to identify your camcorder if you connect it to a computer using the JLIP connector.
6.Rotate the MENU dial to highlight EXIT and press the dial in twice to remove the menus.
56