![](/images/new-backgrounds/1307345/30734547x1.webp)
Connections & Setup
2.Use the number buttons and/or the arrows on your remote to enter your zip code or postal code. Press OK when you’re finished.
Note: If your postal code contains letters, press the up and down arrow buttons on your remote to enter letters, and press the right arrow button to go to the next space. The left arrow button also moves the highlight to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To supply your TV with the correct TV program listings, the GUIDE Plus+ system needs to know if your TV is connected to a cable TV connection.
Notes: : If you’re using a cable box, leave it on so you can receive program information.
If you have two
If your cable system retransmits digital
You cannot tune to digital channels from the GUIDE Plus+ system if you have cable service or a cable box connected unless an
1.If your TV is connected to cable, highlight Yes and press OK.
If your TV isn’t connected to cable, highlight No and press OK. (STEP 3: Configuring for a VCR
2.If you have a cable box connected to this TV, highlight Yes and press OK
Notes: The next series of screens is very important because the GUIDE Plus+ system must find the correct cable box information in order to receive the correct TV program listings.
If you don’t have a cable box connected to this TV, highlight No and press OK (STEP 3: Configuring for a VCR
3.Highlight the channel on ANTENNA A where you have to tune your TV to see cable box programming, and press OK (a screen appears reminding you to connect your
Notes: If not using INPUT 1 (VIDEO1/AUX), you must connect to ANTENNA A not B.
Channel 03 is the most common.
Choose Video1/AUX if your cable box is connected to your TV with audio/ video cables instead of a coaxial cable. Go to page 7 for pictures of these cables. If you choose Video 1/Aux, then connect the cable box to the TV’s INPUT 1.
22 | Chapter 1 |