![](/images/new-backgrounds/1307345/30734529x1.webp)
Connections & Setup
Explanation of Input Jacks and Cables
This section describes the jacks and cables you might use to make connections (cables may be ordered separately by using the order form on page 73). There are several ways to connect components to your TV.
Different jacks and cables provide a different level of performance. It’s important to remember the different degrees of picture improvement for comparison. The component jacks are considered an excellent improvement;
VIDEO
INPUT 5
Note: Remember to connect the left and right audio cables for Input 5
DTVLink® (Digital Television Link) Connectors
DTVLink uses a format better known to some as
Notes: Audio and video information is carried on a single wire.
Digital Audio Output Jack
ETHERNET
Digital Audio Out Jack and Optical Cable
The optical cable is used to connect an audio receiver with Dolby Digital or PCM
Note: This TV’s optical digital output jack fully complies with the international standard governing this type of jack (IEC958), and is designed for connection to a Dolby Digital
Ethernet Jack and Cable
This jack is used to connect a router, cable modem or DSL (Digital Subscriber Line) unit with a CAT 5 (ethernet) cable (not provided). It is recommended that you only connect a router to this jack although you could connect a DSL/cable modem directly.
DTVLink® Certification Logo is a U.S. registered mark of CEA.
FireWire® is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Chapter 1 | 13 |