RCA HD65W40 manual Audio Menu, Reset Controls, Graphic Equalizer

Using the TV’s Menu System

SVM

SVM stands for Scan Velocity Modulation. This feature improves the sharpness of the picture by changing the speed of the cathode-ray tubes’ electron beam when it transitions between dark and light areas of the screen. It sharpens the black-to- white edges and white-to-black edges. Choose On or Off, depending on your preference.

Reset Controls

The Reset Controls menu button resets all picture quality controls to their original factory settings (except for the convergence settings) for the current input.

1.Tune to the “input” for which you would like to apply the setting.

2.Press MENU to access the main menu.

3.Select Picture Quality, and then select Reset Controls to set reset the settings for the currently tuned input.

Audio Menu

The Audio menu lets you adjust audio output. To access the Audio menu, press MENU on the remote, and then select Audio from the main menu. The following audio items can be adjusted: Graphic Equalizer, Audio Processor, Sound Logic, Audio Language, SAP, Balance, Fixed/Variable Out, Digital Audio Out, Subwoofer.

Graphic Equalizer

The seven-band graphic equalizer lets you adjust the audio frequency settings. The equalizer can only be changed if the Fixed/Variable Audio Output is set to Variable Output. If the Fixed/Variable Audio Output is set to Fixed Output, you cannot make changes to the equalizer and the bands are set to 0dB. However, the graphic equalizer levels for Variable Output are stored in memory in case you switch to Fixed Output then back to Variable Output.

Note: If the internal speakers are used as the center channel audio speaker from an external audio receiver, the graphic equalizer settings do not apply.

58 Chapter 4