Connections & Setup

Explanation of Jacks (in alphabetical order)

This section describes the jacks on the back panel of your TV. There are several ways to connect devices.

VIDEO

L

 

AUDIO

 

R

 

 

 

(MONO)

 

 

L AUDIO

R

 

(MONO)

 

 

COMPONENT

 

Y

Pb

Pr

PC/HDMI

AUDIO

ANT INPUT Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box.

AUDIO/VIDEO INPUT 1 Lets you connect a device that has composite video jacks, such as a VCR.

L AUDIO Provides left audio connection when using the VIDEO INPUT 1 jack. The left audio connector is usually white.

R AUDIO Provides right audio connection when using the VIDEO INPUT 1 jack. The right audio connector is usually red.

COMPONENT INPUTS Lets you connect a device that has component video jacks, such as a satellite receiver.

COMPONENT Y Pb Pr Provides optimum picture quality because the video is separated into three signals. Use three video- grade or component video cables for the connection. When using Y Pb Pr, make sure you connect left and right audio cables to the L and R AUDIO jacks.

L AUDIO Provides left audio connection when using the component video inputs. The left audio connector is usually white.

R AUDIO Provides right audio connection when using the component video inputs. The right audio connector is usually red.

DIGITAL AUDIO OUTPUT (Coaxial) Use a digital coaxial cable to connect your TV to a compatible audio receiver for the best digital sound quality.

HDMI INPUT Lets you connect a device, such as a digital cable box, with an HDMI or a DVI output.

HDMI

PC

MONITOR

PC/HDMI AUDIO

S-VIDEO

HDMI (High-Definition Multimedia Interface)

Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI devices.

HDMI 2 (only available for model L32WD26D) Provides a

 

second HDMI connection.

PC/HDMI AUDIO (used for DVI only) Provides audio

 

connection when using the HDMI jack for DVI. Use a 3.5 mm

 

stereo mini pin cable (sometimes referred to as 1/8” stereo mini

 

pin) to receive sound for the DVI connection.

PC MONITOR INPUT Connect your computer, or other device with a VGA output, to this jack using a 15 pin D-sub cable.

PC/HDMI AUDIO Use to obtain sound when a PC is connected to the PC Monitor jack. Use a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8” stereo mini pin) to receive sound for the PC connection.

S-VIDEOAllows you to connect a device that has an S-Video jack. Connect audio cables to the L and R Audio jacks.

L AUDIO R

(MONO)

Chapter 1

15

Page 15
Image 15
RCA L26WD26D warranty Explanation of Jacks in alphabetical order, PC/HDMI Audio used for DVI only Provides audio