Connections & Setup
Back Panel
VID2
• RGB/YPbPr (mini
The RGB/YPbPr jack provides excellent picture quality because the video is separated into three signals. If your component has Y, Pb, Pr jacks, use the supplied 15 pin
• Audio In (Stereo mini jack) Use to obtain sound when a component is connected to the VID2 RGB/YPbPr jack. Use the supplied 3.5mm mini phone to audio cable adapter. Connect audio cables to the end of the adapter.
•Audio Out (Stereo mini jack) Use to output the audio of the selected source component connected to this unit to an AV amplifier or similar component. Use the supplied 3.5mm mini phone to audio cable adapter. Connect audio cables to the end of the adapter.
Side Panel
•Headphone Allows you to connect headphones to listen to the sound coming from the TV.
Note: When you plug in headphones, the TV’s internal speakers are automatically turned off.
If you can’t locate your remote, you can use the side panel of your TV to operate many of the TV’s features.
MENU Brings up the Main menu. When the menu system is displayed, pressing MENU selects highlighted items.
VOL Increases the volume. In the menu system, it points right to items and adjusts menu controls.
VOL Decreases the volume. In the menu system, it points left to items and adjusts menu controls.
CH Scans up through the current channel list. In the menu system, it points down to items and adjusts menu controls.
CH Scans down through the channel list. In the menu system, it points up to items and adjusts menu controls.
POWER Turns the TV on and off.
Note: If you use the Front Panel Block feature, the front panel buttons no longer provide access to the menus. Go to Chapter 3 for more information.
Chapter 1 | Graphics contained within this publication are for representation only. | 5 |
