Using the Remote Control

DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel. Also used with the ON•OFF button to turn on other compatible DVD players.

GUIDE If you’re operating another component that has an on-screen program guide, this button accesses the on-screen guide.

OPEN•CLOSE In DVD mode, opens or closes the DVD disc tray.

REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for some remote-controllable VCRs or DVD players.

SEARCH In VCR mode, accesses Index Search feature.

SPEED In VCR mode, selects a recording speed.

VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

ZOOM In DVD mode, zooms in on the picture.

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and view components you have connected to the TV.

1.Make sure the component you want to view is turned ON.

2.Press INPUT to tune to an available video input source and view the component.

3.To return to the previous channel, continue pressing INPUT.

DVD

DVD

ON OFF

Programming the Remote to Operate Other Components

and VCR buttons

CLEAR button

VCR

TV

VOL

CH

MUTE

GO BACK

CLEAR

MENU

 

OK

PRESETS

SKIP

CC

INFO

GUIDE

ON•OFF

button

The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components.

Notes: The TV button can’t be programmed on this remote.

The remote may not be compatible with all brands and models of components. It also may not operate all functions of the remote that came with your component.

1

2

3

4

5

6

7

8

9

INPUT

0

ANTENNA

 

REVERSE

PLAY

FORWARD

REVERSE

RECORD

STOP

PAUSE

 

 

 

and PLAY

AGAIN

ZOOM

OPEN CLOSE

SPEED

 

STOP

buttons

SEARCH

 

 

button

 

 

 

You’ll use these buttons when you program the remote.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be programmed for your component, turn the component ON. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the VCR, and press the VCR button. Then press ON•OFF or CH + (channel up) or CH – (channel down) to see if the VCR responds to the remote commands. If the component does not respond, the remote needs to be programmed.

Programming the Remote

There are two ways to program the remote control:

automatic code search

direct entry

12

Graphics contained within this publication are for representation only.

Chapter 2

Page 16
Image 16
RCA LCDS2022B manual Programming the Remote to Operate Other Components, Using the Input Button