Powering Your Camcorder (continued)
Using the Battery to Power Your Camcorder (continued)
CAMERA/OFF/VCR Switch
BATT EJECT 
To Attach Battery
If the power connector is attached to the camcorder, remove it before attaching the battery.
•Hold the battery flush against the camcorder and slide it to the right as shown.
Make sure it is firmly attached to the camcorder.
Remove the Battery
Press and hold BATT EJECT while sliding the battery to the left and off the camcorder.
Battery Safety Precautions
Do not short the battery’s terminals.
Do not attempt to disassemble or modify the battery. There are no user- serviceable parts inside.
Use the battery only with specified adapter/chargers and camcorders.
Throwing the battery into a fire or exposing the battery to excessive heat – over 149º F (65º C) could be hazardous.
ATTENTION: THE PRODUCT THAT YOU HAVE
PURCHASED USES A RECHARGEABLE BATTERY. AT THE END OF ITS USEFUL LIFE, UNDER VARIOUS STATE
AND LOCAL LAWS, IT MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE STREAM.
CHECK WITH YOUR LOCAL SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL.
20
