RCA Pro809 Titler, Creating a Title, Delete a Title, Place DATE/TIME/NORMAL/TITLE in Title

Titler

The title can be displayed and recorded at any time. The built-in character register contains 47 characters for creating titles on two lines with up to 16 characters per line.

–	SET	ON/OFF	DATE/
			TIME
			NORMAL
	RESET Z/MEMORY OSD		TITLE
CHAR–	CHAR+ SET	ON/OFF
CHAR (Character)

–and +

SET

ON/OFF

DATE/TIME/NORMAL/ TITLE in TITLE

		FADE	B.LIGHT
			EDIT+
		–	D•S•E
	EDIT
	A/M	FOCUS		SELECT
	REC			SCENE
VCR
		AUTO

TE/

TIME

NORMAL

TITLE

OSD

ON/OFF

EJECT

BATT

A/V

IN

OU

CAMERA/OFF/VCR Switch (Located on Other Side)

Creating a Title

1.Attach a power source and place CAMERA/OFF/VCR in CAMERA.

2.Place DATE/TIME/NORMAL/TITLE in TITLE.

3.Press SET to move the flashing cursor to the place you want to begin.

4.Select the first character by pressing CHAR + or CHAR – until the character you want appears. See the “Chart of Characters” on the next page for the characters available in the titler’s register.

5.After you have selected the first character, press SET to move the flashing cursor to next position.

6.Repeat steps 4 and 5 until you have completed the title.

Note: To correct a character, press SET to place the cursor over it and then press CHAR + or CHAR – to enter the correct character.

If you want to delete a character, press CHAR + or CHAR – until the blank space appears.

7.Press ON/OFF to store the title and remove it from the viewfinder when you are finished.

Important Note: Place TIME/DATE/ NORMAL/TITLE in NORMAL to remove the titler graphics from the viewfinder for normal recording.

Delete a Title

Display the title and press SET to place the cursor over the character you want to delete. Then press CHAR + or CHAR – to enter the blank space (-). Press SET to place the cursor over the next character you want to delete and enter the blank space (-). Continue until all the characters are deleted.

42