RCA Pro809 specifications Use, Object and Liquid Entry-Never

IMPORTANT SAFEGUARDS (continued)

12.Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna- discharge unit, size of grounding conductors, location of antenna- discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below as per National Electrical Code, ANSI/NFPA 70.

Example of Antenna Grounding

13.Power Lines—An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer.

Use

14.	Cleaning—Unplug this product
	from the wall outlet before cleaning.
	Do not use liquid cleaners or aerosol
	cleaners. Use a damp cloth for
	cleaning.
15.	Object and Liquid Entry—Never
	push objects of any kind into this
	product through openings as they
	may touch dangerous voltage points

ELECTRIC SERVICE EQUIPMENT

A N T E N N A

LEAD IN

WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810 - 20)

GROUNDING CONDUCTORS (NEC SECTION 810 - 21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

or “short-out” parts that could result

in a fire or electric shock. Never

spill liquid of any kind on the

product.

(continued on next page)

vi