First-Time Operation
2.Attach lens cap cord and adjust handstrap.
A.Press in on the tabs on both sides of the lens cap to remove it.
B.Attach the lens cap cord to the lens cap.
3.Attach shoulder strap.
A.Unfasten one end of the shoulder strap from the buckle. Make sure you leave the buckle on the strap.
B.Thread one end of the shoulder strap through one of the shoulder strap rings
Shoulder Strap Rings
C. Pull up the flap of the handstrap and open the strap.
C.Thread the strap back into the buckle as shown below. Pull on the strap and make sure it is fastened securely before using it to support your camcorder.
D. Run the cord from the lens cap through the A/V terminal cover and over the end of strap.
E.Adjust the strap for comfort and close the flap.
Note Make sure the end of the strap is positioned securely before closing the flap.
F. Slide the lens cap onto the strap.
D.Repeat steps
Cautions: When carrying the camcorder with the shoulder strap, make sure the viewfinder is in its down position. This helps prevent possible damage to the viewfinder from bumping against your body as you move.
Make sure the shoulder strap is firmly attached before using it to carry your camcorder.
3
