Powering Your Camcorder
Using the Rechargeable Battery to Power Your Camcorder
The battery must be installed as described on the previous page before it can be charged.
CHARGE Indicator
Battery Installed
To AC 100-
240V, 50/60 Hz
Adapter
| CHARGE VCR | CAM | |
|
|
|
|
|
|
|
|
DC IN Jack
Charge the Battery
1.Install the battery as described on the previous page.
2.Insert the small plug on the AC adapter in the DC IN jack on the camcorder.
3.Plug the AC adapter into an operating AC outlet.
4.Slide the POWER switch down into the CHARGE position. The CHARGE indicator will light and the battery will begin charging.
5.The 234329 battery (model Pro842) takes approximately 12 hours to charge, and the 234330 battery (models Pro847 and Pro848) takes approximately 16 hours to charge.
6.When the CHARGE indicator starts flashing, make sure to unplug the adapter from the wall outlet and the camcorder.
Notes: After approximately 16 hours, the CHARGE indicator will begin flashing to remind you that the battery is charged. Your battery may be charged before the CHARGE indicator starts flashing.
The CHARGE indicator will start flashing approximately 16 hours after the POWER switch is placed in CHARGE even if no battery is being charged.
Do not charge other models of batteries with the camcorder.
9
