Major Components
4.0MAJOR COMPONENTS
The Liebert
4.1Main Frame and Electronics
This 6U cabinet arrives without internal batteries to lighten the UPS for easier installation. Once the cabinet has been placed in its final floor or rack position, the internal batteries may be installed. The UPS is shipped with standard hardwire terminal blocks for input and output connections.
Figure 1 10 kVA Dual Inverter Liebert GXT2-10000RT208, front and rear views
Status Indicators
and Controls
FRONT VIEW | Front Bezels, 3 |
|
External Battery
Connectors
| Output |
| Circuit |
GXT | Breaker |
UPStation |
|
Hardwire 
Knockouts
Battery Compartment
(behind center and right bezels); Internal
Battery Pack is shipped loose
(see Section 4.2)
REAR VIEW | Liebert |
| IntelliSlot® Port |
Communications
Ports, 2
Cooling Fan,
1 of 3
REPO
Switch
UPS/Bypass
Breaker
Input Circuit
Breaker
4.2Internal Battery Pack
The center front bezel may be pulled forward and removed to reveal the battery access plate. The cover plate can be removed by extracting the three screws at the top of the cover plate and lifting the plate off. The two internal battery packs are compact assemblies ready to slide into the battery com- partment after the front battery access plate has been removed. Electrical connection is made with the two slotted battery connectors.
Figure 2 Internal battery pack and connector
Battery connector
on front of battery pack
7
