Emerson GXT2-10000RT208 Add an Output Power Distribution Module-Optional, Liebert GXT2 10000RT208

Installation and Configuration

6.3.3Add an Output Power Distribution Module—Optional

To add an optional output distribution module to the Liebert GXT2 10000RT208:

1.Remove the four screws securing the blank output distribution cover plate to the rear of the UPS. The cover is at top left corner in the tower configuration and at the bottom left in the rack configuration.

2.Set the screws aside to attach output distribution module to UPS.

3.Snap together the electrical connectors on the UPS and on the output distribution.

4.Use the screws removed in Step 2 to attach the output distribution to the rear of the UPS.

Screw holes

Output Distributionto attach to UPS

Cover Plate

n 250V~ 30A KER BREA OUTPUT

Hardwire

Terminal

Block

Cover

						-
					125V
				L1	T20A	TO
		OUTPUT			PUSH	T
					RESTAR
			-					-
		125V
	T20A		TO		T20A		125V
	PUSH		T					TO
								T
	RESTAR					PUSH
						RESTAR
	-			-
125V			125V		L2
T20A	TO	T20A		TO
PUSH	T	PUSH		T OUTPUT
RESTAR			RESTAR

Electrical Connector	Screw holes
snaps to connector	to attach to UPS
inside UPS	Optional Output
	Power Distribution
	Module
	(PD-101 shown)

REAR VIEW

Liebert GXT2 10000RT208

16