RCA Pro884HB CRF81 RF Output Adapter AVS80 Synchro Edit Cable, VAA008 Audio/Video Input Cable

Optional Accessories

CRF81 RF Output Adapter AVS80 Synchro Edit Cable

This adapter is used to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer, such as 193983. If your TV has 300-ohm VHF screw terminals, you will need an optional 75-300 ohm transformer, such as AH011.

VAA008 Audio/Video Input Cable

This audio/video input cable will enable you to use your camcorder to record from other devices which have audio/video output jacks (such as another VCR, camcorder, or TV monitor). This makes it convenient to copy tapes or record a television broadcast. The VAA008’s plug is specially designed so other cables and accessories can be plugged into the camcorder at the same time.

AH25 Y-Adapter

This Y-adapter allows you to connect your camcorder’s mono audio cable to a stereo TV or VCR.

This cable attaches to the camcorder to provide video and audio outputs for dubbing, or for direct input to a monitor receiver. It can also control the start/stop functions of a VCR with a compatible 2.5mm PAUSE, EDIT, EDIT IN, EDIT IN/OUT, or SYNC jack when copying a tape.

193983 Cable Transformer

The 193983 is used to connect a standard 300-ohm antenna twin-lead to a standard round 75-ohm connector on the RF output adapter, a VCR, or TV.

AH011 Cable Transformer

The AH011 is used to connect a standard round 75-ohm antenna cable to the

300-ohm screw terminals on a TV.

All specifications and descriptions of accessories are subject to change without notice.

63