Trouble Checks

 

Trouble

Checks and Adjustments

 

 

 

 

 

 

Poor auto-focus

• Make sure FOCUS does not appear in viewfinder. Press

 

 

operation

FOCUS F and N buttons together to turn on auto focus.

 

 

 

See pages 34-35.

 

 

 

• Scene is dark. Auto-focus may not work under this

 

 

 

condition. See pages 34-35 for details on manual focus.

 

 

 

• Lens is smudged, and image appears unfocused.

 

 

 

• Viewfinder eyepiece focus is misadjusted. See page 31.

 

 

 

 

 

 

Date and/time, date, or

• Date and time or date will be recorded on tape whenever

 

 

date and title were

they appear in the viewfinder. Press DATE/TITLE button

 

 

recorded on tape

to remove them from viewfinder when recording.

 

 

 

• Auto date or auto title feature turned on. See page 29.

 

 

 

 

 

 

Date and/or time are

• Camcorder’s internal battery may need replacing.

 

 

incorrect

See page 30.

 

 

 

• Date and/or time may need to be set. See page 28.

 

 

 

 

 

 

Remote control

• Aim remote at remote sensor on camcorder.

 

 

will not operate

• Remote must be within 13 feet from the camcorder to

 

 

camcorder

operate it.

 

 

 

• Remote control cell may need replacing. See page 11.

 

 

 

CAM/OFF/VCR switch must be in CAM or VCR for

 

 

 

camcorder to operate.

 

 

 

• Camcorder’s remote control sensor is exposed to direct

 

 

 

sunlight or strong artificial light. This may interfere with

 

 

 

operation of camcorder by remote.

 

 

 

 

 

 

Camcorder will not

CAM/OFF/VCR switch must be in CAM.

 

 

record from audio/

• Check cable connections and make sure other component

 

 

video connector

is playing. See pages 48-49.

 

 

 

 

 

 

Camcorder turns off

• Camcorder remained in pause for five minutes. Turn

 

 

during operation

camcorder back on.

 

 

 

• Rechargeable battery needs recharging or alkaline

 

 

 

batteries need replacing.

 

 

 

 

 

 

Recorded audio too low

• Subject too far from camcorder.

 

 

 

 

 

 

No picture during

• If the cassette was recorded in high-band 8mm, it must be

 

 

playback in VCR

played back on a high-band VCR or camcorder.

 

 

 

 

 

 

Recording not in high-

High-band 8mm cassette was not used. If a standard 8mm

 

 

band 8mm

cassette is used, recording will be standard 8mm.

 

 

 

 

 

 

Cannot hear both

• Tape copied to or from mono VCR or camcorder. May

 

 

channels of sound on

need Y-adapter.See pages 48-49 and 56-57.

 

 

tape copies

 

 

 

 

 

 

69

Page 71
Image 71
RCA Pro884HB manual See pages