RedMax G5000AVS manual Maintenance, F22 F23 F24 F25, English

F22

F23

F24

F25

English

10. Maintenance

Maintenance, replacement, or repair of the emission control device and systems may be performed by any non-road engine repair establishment or individual.

WARNING

Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug to prevent accidental starting.

■MAINTENANCE AFTER EACH USE

1. Air filter

Dust on the cleaner surface can be removed by tapping a corner of the cleaner against a hard surface. To clean dirt in the meshes, split the cleaner into halves and brush in gasoline. When using compressed air, blow from the inside. (F22)

To assemble the cleaner halves, press the rim until it clicks. (F23)

2. Oiling port

Dismount the guide bar and check the oiling port for clogging. (F24)

(1) Oiling port

3. GUIDE BAR

When the guide bar is dismounted, remove sawdust in the bar groove and the oiling port. (F25)

(1) Oiling port

42