INSTALLATION
5) Install the back brick panel by carefully placing it against the back | 7) Slide the left side brick panel into position and secure in place with |
wall of the firebox. | the brick panel clip that was removed in step 3. |
L e f t
Side
Brick
Panel
Back Brick Panel
Exterior Brick Panel Installation:
1) Ensure installation of the logs and glass door has been completed before installing the exterior brick panels.
2) Line up the pins in the exterior base brick panel with the holes on the outerbox of the firebox and fit in place.
6)Place the top brick panel into position and hold it in place while slid- ing the right side brick panel into position and secure using the brick panel clip that was removed in step 3.
Top Brick Panel
Outerbox of Firebox
3) Install the right side exterior brick panel by placing the bottom tab into the slot of the exterior base brick panel.
INSTALLATION
Top Brick Panel
The top of the brick panel is held in place by a magnet that sits against the bracket as shown in the image below.
Repeat for left side exterior brick panel.
Right Side
Brick Panel
Bracket
Brick
Panel
Clip
Tab
Base Brick Panel Slot
Regency® L900E Direct Vent Gas Fireplace | 29 |
