Regency L900E-NG installation manual Embers on bottom brick panel

INSTALLATION

5)Place the left end of log 03-43 into the pin while fitting the notch onto the burner tube. Slide the right end of the log forward until it is approximately 3/8" away from the back side of the grate.

03-43

8)Spread all of the Embers on the bottom brick panel around the burner tube and on the inside of the grate as shown.

Separate platinum embers and place on the embers around the burner tube and on the inside of the grate. Avoid stacking platinum embers.

INSTALLATION

Embers on bottom brick panel.

Burner Tube

6)Line up the two holes on the underside of log 03-44 with the pins on logs 03-41 and 03-42 and fit in place.

03-44

03-41

Embers on inside of grate.

03-42

9) Spread the vermiculite on the base brick panel covering the remaining exposed base brick.

7)Line up the two holes on the underside of log 03-45 with the pins on logs 03-41 and 03-43 and fit in place.

03-45

03-41

03-43

Regency® L900E Direct Vent Gas Fireplace 31