MAINTAINENCE

BACK-UP BATTERY REPLACEMENT

1)Disconnect the power cord, located on the left hand side of the fi rebox.

Power

Receptacle

Heat

Shield

2)Loosen the 2 screws that hold the right side heat shield in place.

3)Lift the heat shield up and pull out slightly to clear the head screws and then hang it on the top bracket (located directly above the heat shield, close to the top of the fi rebox).

4)Remove the battery by lifting off the velcro and bring out from the side of the fi rebox.

CONTROL BOX REPLACEMENT

1)Remove the exterior brick panels.

2)Remove the glass door.

a.Release the 2 door latches on the left and right side at the top of the fi rebox.

Latch Location

Latch

b.Swing the door out from the top and release the hinges on the left and right side of the door by lifting them up.

Backup

Battery

Hinge

Door

3) Loosen the 2 screws that hold the right side heat shield in place.

5)Disconnect the wires connected to the battery.

Heat

Shield

6)Replace with new battery and reconnect battery wires accordingly.

7)Re-install the battery to the right side of the fi rebox.

8)Re-install the right side heat shield.

MAINTENANCE

Regency® L900E Direct Vent Gas Fireplace

37

Page 37
Image 37
Regency L900E-NG installation manual Maintainence, BACK-UP Battery Replacement, Control BOX Replacement