Regency P121RC Installation, Locating Your Gas Fireplace, A P121-1See Thru B P131-1Pier

INSTALLATION

LOCATING YOUR

GAS FIREPLACE

1)When selecting a location for your stove, ensure that the clearances are met as outlined on page 9.

2)Provide adequate clearances for servic- ing.

3)The appliance must be installed on a flat, solid, continuous surface (e.g. wood, met- al, concrete). This may be the floor, or raised up on a platform to enhance its visual impact. If the appliance is going to be installed on carpeting, combustible linole- um tile or other combustible material other than wood flooring, the appliance must be installed on a metal or wood panel extend- ing the full width and depth of the appli- ance.

4)The Direct Vent Gas Fireplace can be installed as follows:

Model # Position

A)P121-1: See Thru

B)P131-1: Pier

C)P121LC-1: Left Corner

D)P121RC-1: Right Corner

5)This appliance is Listed for bedroom instal- lations when used with a Listed Millivolt Thermostat. Some areas may have further requirements, check local codes before installation.

6)The P121-1/P121LC-1/P121RC-1/P131-1 Direct Vent Gas Fireplace is approved for alcove installations, which meet the clear- ances listed on this page.

7)We recommend that you plan your instal- lation on paper using exact measurements for clearances and floor protection before actually installing this appliance. Have a qualified inspector, dealer, or installer re- view your plans before installation.

Note: For Exterior Vent Termination Locations see page 12.

.

A) P121-1 See Thru

B) P131-1 Pier

C) P121LC-1 Left Corner

D) P121RC-1 Right Corner

8 Regency P121-1/P121LC-1/P121RC-1/P131-1 Zero Clearance Direct Vent Gas Fireplace