Copying

To program the user stamp

This function scans an image that is used as a user stamp.

The range of stamp images for readability is 10–297 mm (0.4”-11.7”) high and 10–432 mm (0.4”-17.0”) wide. However, if the value exceeds the maximum value of the area (5,000 mm2, 7.75 inch2), it is corrected within the range of the area au- tomatically.

2A Make sure that the machine is in copier mode.

B Press the {User Tools/Counter} key.

AMG041S

C Press [Copier / Document Server Features].

D Press [Stamp].

E Press [User Stamp].

F Press [Program / Delete Stamp].

G Press [mProgram], and then press the stamp number you want to program.

H Enter the user stamp name (up to ten characters) with the letter keys, and then press [OK].

I Enter the horizontal size of the stamp with the number keys, and then press {q} key.

J Press [Vertical], and then enter the vertical size of the stamp with the number keys, and then press {q} key.

112