Copying
D Place the originals, and then press the {Start} key.
Note
❒Only programs with m against them contain a program in step C.
Programming Defaults in Initial Display
2 This section describes how to program defaults for the initial display when modes are cleared or reset, or immediately after the operation switch is turned.
The default settings you can program are Colour Mode, Paper Tray, Original Type, Density, Special Original, Original Orientation, Cover/Slip Sheet, Edit / Colour, Dup./Combine/Series, Reduce / Enlarge, Finishing.
A Specify scan settings and any other settings you require in the initial dis- play.
B Press the {Program} key.
C Press [Program as Defaults].
D Press [Program].
E When a confirmation dialog appears, press [Yes].
The current settings are programmed as defaults. The screen returns to the initial display.
Note
❒To restore the factory default settings on the initial display, press [Restore Factory Defaults].
❒The default settings can be programmed separately for the normal screen and simplified screens.
142