Placing Originals
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important | 1 |
❒Do not lift the exposure glass cover or ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
A Lift the exposure glass cover or ADF.
Be sure to lift the exposure glass cover or ADF by more than 30 degrees. Oth- erwise, the size of the original might not be detected correctly.
B Place the original face down on the exposure glass. The original should be aligned to the rear left corner.
Start with the first page to be copied.
AMF020S
APositioning mark
BLeft scale
C Lower the exposure glass cover or ADF.
Placing Originals in the Auto Document Feeder
Place originals in ADF.
Settings should be made in the following situations:
❖When placing originals consisting of more than 50 pages:
See “Batch mode”.
❖When placing originals one by one:
See “SADF mode”.
❖When copying originals of various sizes:
See “Mixed size mode”.
❖When placing custom size originals:
See “Custom sizes”.
17