Copier Functions
C Press [First Chapter No.], enter the chapter number from which to start numbering with the number keys, and then press the {q} key.
You can enter between 1 and 9999 for the chapter number from which to start numbering.
D Press [First Printing Number], enter the page number from which to start printing with the number keys, and then press the {q} key.
E F G
Press [OK]. | 2 |
|
When page designation is complete, press [OK] twice.
Place the originals, and then press the {Start} key.
Note
❒To change the number entered in step B, press the [Clear] or {Clear/Stop} key, and then enter a new number.
❒If you selected “1/5,2/5...” and want to change the settings (the first print- ing page, the number of page from which to start numbering, or total
number of pages) after pressing [OK] in step F, press [Change] and then en- ter the numbers again.
❒If you selected “1/5,2/5...” and want to change a page number after press-
ing [OK] in step F, press [Change] and then enter the number again with the number keys.
Image Repeat
The original image is copied repeatedly.
There are two ways to specify an image to be repeated.
❖Whole Area Repeat
Repeatedly copies the entire image.
❖Specified Area Repeat
Repeatedly copies a specified portion of the image.
Note |
|
❒ See “Image Repeat Separation Line”, General Settings Guide. | 123 |
|