Copying

When copying onto OHP Transparencies or Thin Paper

When copying onto OHP transparencies or thin paper, select the type and size of paper.

Important

❒We recommend that you use specified OHP transparencies.

2

❒ OHP transparencies must be loaded face down in the tray with the notched

 

corner of the sheet in the appropriate corner of the tray.

❒To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.

❒When copying onto OHP transparencies, remove copied sheets one by one.

A Open the bypass tray, and then align the paper guide to the paper size. B Insert the paper face down until you hear the beep.

C Press the {q} key.

D Select paper type ([OHP (Transparency)] or [Thin Paper]) in the special paper settings.

E Select the paper size, and then press [OK] to return to the initial display. F Place the paper, and then press the {Start} key.

G When the copy job is finished, press the {Clear Modes} key to clear the set- tings.

Note

❒For OHP transparencies or thin paper, print speed is slower when com- pared to printing on plain paper.

38