Copying
Size Magnification
This function calculates an enlargement or reduction ratio based on the lengths of the original and copy.
2
Measure and specify the lengths of the original and copy by comparing “A” with “a”.
A Press [Reduce / Enlarge].
B Press [Size Magnification].
C Enter the length of the original with the number keys, and then press {q} key.
You can enter sizes between 1 to 999 mm in 1 mm steps.
D Enter the length of the copy with the number keys, and then press {q}key.
E Press [OK] twice.
F Place the originals, and then press the {Start} key.
Note
❒To change the length after pressing {q} key in step D, select [Original] or [Copy], and then enter the desired length.
68