Programs
Programs
You can store the frequently used copy job settings in the machine memory and recall them for future use.
You can store up to 10 programs.
Note
❒ You can select the standard mode or program No. 10 as the mode to be set 2 when modes are cleared or reset, or immediately after the operation switch is turned on. See “Programming Defaults in Initial Display”.
❒Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized with User Tools (Sys- tem Settings) will be selected first. See “Paper Tray Priority”, General Settings Guide.
❒Programs are not deleted by turning the power off or by pressing the {Clear Modes} key.
Storing a Program
Stores a program.
A Edit the copy settings so all functions you want to store in this program are selected.
B Press the {Program} key.
AMG078S
C Press [Program].
139