Caution---------------------------------------------------------------------------------

Do not turn off the camera or disconnect the USB cable during image transfer.

You can also click [Eject] on the [File] menu to cancel the connection.

If the USB cable is disconnected without disabling the connection, the Unsafe Removal of Device screen may be displayed. Be sure to stop the connection before removing the USB cable.

When you connect your camera to a Macintosh computer, a file called “FINDER. DAT” or “.DS_Store” may be created in your SD memory card, which will appear as [Unmatched File] on your camera. You can delete this file from the SD memory card if you wish.

Using the MP File Viewer

Downloading Images to Your Computer

When you shoot one still image with M-Cont Plus, Speed Cont, or Multi-trgt AF, the image is recorded as one MP file.

By using the VM1 MP file viewer, you can play back MP files on your Macintosh computer and export still images.

This section explains how to install and uninstall the VM1 software. For details on how to play back MP files on your computer or export still images from MP files using the MP file viewer, see the “Software User Guide” (PDF file).

Installing Software

Caution---------------------------------------------------------------------------------

Before proceeding, confirm that [Mass Storage] is selected for [USB Connection Type] (GP.119) in the setup menu (GP.114).

8 1

Turn the camera power off, and pull the SD memory card

 

out of the camera.

• With SD memory card in the camera, the software cannot be installed.

136

Page 138
Image 138
Ricoh CX6 manual 136, Using the MP File Viewer, Out of the camera