Ricoh CX6 manual Press the ADJ./OK button, Setting the Date and Time, Date, time and format

If you are using the camera for the first time, read this section.

Setting the Language

1	Push the ADJ./OK button !"NF
	to select a language.

• When the DISP. button is pressed, the language setting is canceled and the date/time setting screen appears.

2 Press the ADJ./OK button.

•The display language is set, and the date/time setting screen appears.

Setting the Date and Time

1	Push the ADJ./OK button !"NFto set the year, month,
	date, time and format.
	•	Change the setting with !"and
		move the item with NF.
	•	You can cancel the setting by pressing
		the DISP. button.
	• For information on how to use the
		ADJ./OK Button, see P.16.

2	Check the information on the screen and then press the
	ADJ./OK button.
	•	The confirmation screen appears.
3	Press the ADJ./OK button.
	•	The date and time are set.

• The language, date, and time can be changed at any time using the [Language/N] and [Date Settings] items (GP.119) in the setup menu (GP.114).

Note--------------------------------------------------------------------------------------

• The [Date Imprint] item (GP.72) in the shooting menu (GP.66) can be used to stamp photographs with the date and time of recording.

• To retain the date and time settings, load a battery with adequate remaining power for more than two hours.

	• If the battery is removed for more than one week, the date and time settings
26	will be lost. These settings must be made again.