Ricoh CX6 manual 104

4 PlaybackMenu

3	Set the television to Video mode (Set the input to Video).
	• For details, see the documentation that came with the television.
4	Press the POWER button, or press and hold the 6
	(Playback) button to turn the camera on.

Caution---------------------------------------------------------------------------------

•Always connect the dedicated cable to the common terminal for USB port/AV output and the HDMI micro output terminal respectively. Using other cables to connect or connecting to the terminal other than specified can result in malfunction.

•When the AV cable or an HDMI cable is connected to the camera, the picture display and the speaker output turn off.

•Do not force the AV cable or an HDMI cable into the terminal.

•Do not apply excessive force with the AV cable or an HDMI cable connected.

•When using the AV cable or an HDMI cable, do not move the camera with the cable.

Note--------------------------------------------------------------------------------------

•The camera body can be connected to TVs that support HDMI using an HDMI cable (optional). See the documentation provided with TVs for details.

•The camera supports the following video standards: NTSC and PAL. Where possible, the camera is set to the standard used in your country or region before

shipment; before connecting the camera to a device that uses a different video standard, choose the appropriate video mode (GP.119).

•If connecting or disconnecting the HDMI cable in multi-frame views of the playback mode, the display switches to single frame view. When the menu is displayed, it will not switch to single-frame view even if connecting or disconnecting the HDMI cable.

•The resolution for HDMI output is set to [AUTO]. If the video resolution actually

shown on the display is low, change the [HDMI Output] settings in the setup menu (GP.120).

104